Showing posts with label craft. Show all posts
Showing posts with label craft. Show all posts

21 Aug 2014

Korra Cosplay: Armbands/Bracers

Believe it or not, progress has been made on my Korra cosplay.

In my last post I made Korra's pants; shortly after that I made the apron thing (haven't uploaded photos yet). At the moment it ties up at the back. I will probably put some snaps or belt carriers on the pants to hold it together.

One of my kind friends gave me some boots that are pretty much perfect. The material on the outside is plain fabric, so it will be easy to sew into. They also slouch down a bit, so I can put some suede of the right colour on it and it should have the baggy feel of Korra's boots.

I've also made a dozen or so muslins for Korra's top - I'll dedicate a whole post to that soon.

In the meantime I distracted myself by making Korra's armbands.

I didn't feel confident that I could sew some armbands that would stay up, so I opted to make something a little more solid - some fabric bracers.


I grabbed some black craft foam (you can pick this up from any craft store - I got mine from Spotlight) and some material the same colour as her apron. This fabric is made of stretchier stuff than the apron is, so it should be able to conform to the rounded arm shape.

I used Ados glue to bind the fabric to the foam - the stuff would seep through, so I only glued on the underside of the bracer.


Now I have a bunch of these things, called grommets or eyelets or what have you. I'm pretty sure that I only have the one half of the little things. As you can see in this tutorial the grommet consists of two parts - the grommet and the washer. I was missing the washers.

So I did the unthinkable and smooshed the grommets together. You can't really tell that I did this because the eyelets will be located under the bracer and you won't be able to see the extra metal inside of them.


Here's my test piece. The Ados bonded really well - I'm glad I didn't have to run out and grab any fabric glue.


Here's the final pieces with the fabric glued on. Making the pattern is pretty straightforward. Measure around your wrist and around your arm where the bracer will come up to. Then measure the length. Remove a centimetre from the horizontal measurements so you leave a gap for the ties.


After inserting the grommets. The fabric is a little wrinkly, but remember this will be stretched around my wrist so the fabric will even out.


After adding some string and tying it on. I think I need to lace it another way - the wrist and the other end should be pulling horizontally, not downwards.

The one part that is missing is the white trim. Since I opted to make bracers, I couldn't just attach some bias binding or white ribbing to the outside.

Since the string is kind of scratchy, so I thought I might make a couple of tight fabric wristbands and put them on underneath the bracers.


Pretty happy with the effect here. I'm wearing them around to make sure the trim doesn't slip below the bracer. To fix this I would add snaps or some velcro to secure it in place.


Rarr! I feel strong!



Next post: Korra's shirt, part one

10 Jan 2014

A Knitting Needle Holder

So I thought it was about time I learned to knit. Naturally I had to hoard knitting needles, and of course after that I had to make something to store them in. It's unseemly to have your knitting needles just lying about.

Based roughly on this knitting needle case tutorial, I created this thing!


I didn't like the way that the edges in the original tutorial were left unfinished, so after sewing the pockets to the back, I encompassed everything in another square of fabric and turned it, then top-stitched around the outside.

Since none of my needles matched I didn't want them sticking out the top, so I made sure the case was tall enough to cover them up, unlike the tutorial where the needles are pretty enough to be displayed. Blush.

I also spent about an hour on a couple of straps made from the same fabric, but they were too stiff to tie up. Instead, feeling thrifty, I sewed up a length of bias binding with white thread and called it a unique feature.


When it's bound up it looks like some sort of magical scroll!


Which is rather fitting when you check out these 5.5mm needles I picked up from an op shop. They are definitely wizard wands!


I also tied the needle gauge to one of the ties. pretty handy for checking the sizes of the needles.

I've actually already finished one amazing knitting project - a scarf! Wow! It doesn't even have tassels. But it deserves its own blog post as the first thing I knitted without holes all through it. I'm going to call it either the Adventure Time Scarf, or the Scarf of Finn, because...well, you'll see!

22 Mar 2013

Cross-Stitch - It's a bird!

Hooray, you can actually tell what this thing is now!


Next up will be the nest - the most daunting part, I think. Probably because the colours of the nest are so similar.

First Post

23 Feb 2013

First Try at Cross Stitch

I bought a cross stitch kit from the internet a while ago, and finally go started on it yesterday. The kit came with all the floss, so I got to use my organiser that came with floss-storers.



Can't really tell what it is yet! It's a lot larger than I thought it would be, so this will be quite the project.

9 Mar 2012

La Vie En Rose Headband

No, I haven't seen the movie. Yet.


I made this for an old friend for her birthday. Haven't seen the high school crowd in a while! Here's the pattern. The band is a long chain, with single crochet rows to widen it.

The pattern for the rose is very easy. Next time I'd use a lighter weight of yarn - the wool made for a rather large rose.

31 Jan 2012

7 Nov 2011

The Initial Post

I've been very impressed with Blogger's UI so far. I'm glad to see that there is a lot of elbow room for front end development, and I plan on changing the CSS shortly.

So, the purpose of this blog...I guess it will help me warm up to my new DSLR (a Canon 1000D), and share some lols with friends. It should also help me improve drawing and design - hence the title and domain name.

For my first post, I'm going to share some crochet I just did (more crafts-y than design-y)! The pattern can be found here. The thread I used is a lot thinner than in the tutorial, but the pattern is pretty straightforward and I continued the coaster for a couple more rows.