Korra Book 4 Cosplay write-up

The January Auckland Cosplay Picnic gave a good incentive to finish my second cosplay - once again, Korra. But this time from Book 4, in her Earth Kingdom garb. Turned out to be perfect for a picnic!

I started with the pants, as they were very similar to her season 1 outfit.

The cuffs were cut and sewn separately, then sewn into the pants. I put elastic in them it keep them taut. The ties were made much later.

Next up, the backpack! This was a pretty fun part. I learned how to make (and sew) piping, and used sew-in interfacing for the first time. I prefer iron on, though.

The tutorial I used was this one, minus a few bits and pieces.

Sewing the interfacing in

Sewing the piping! This fabric is from the dress I'm using for Post Apocalyptic Jane

Sewing it together

The outside complete

Added some lining from some fat quarters I had lying around

Strap sewn in, flap sewn on, and an elastic closure added

I then started work on the top. This time I used what I learned from a draping panel at Armageddon, and it came out pretty well!

The darker green was very hard to find. I wanted to use a natural fibre, but there was only polyester!

The detailing is sewn together

And the complete tunic

At this point I think the picnic was only a week away, and I started panicking a wee bit. My wig hadn't arrived, and I didn't want to cut my hair. I had kind of started the shoes, but still had a number of small things to finish off. I dug my heels in and got back to work!

I pulled apart these old, worn shoes to make the template

The outers are done!

As well as the insole - cardboard with craft foam, then fabric sewn onto it

After a lot of hot glue, the end result

My wig arrived with plenty of time to spare - I'm very pleased with the quality! It needs a bit of styling, but would do for the picnic.

The night before the picnic, I made the belt and attached the button to the backpack. Oh wait, what button? I don't have a big yellow button!

3D printer to the rescue! In half an hour, I had a perfect yellow button, which I attached with leftover piping I turned through.

And here's the end result!

Photo by Pixiscene Cosmedia

Armageddon Expo 2014!

I've been to Armageddon Expo before. A few times, actually, when it was held at Aotea Centre. I used to go all three days, then cut it back to one. There wasn't that much content for me.

So this year I decided to cosplay, which is why I've been making a Korra cosplay this whole time. I thought it would be a bit more fun - an excuse to meet other cosplayers, and I might even get some photos.

I wasn't prepared for how much better it would be.

In the days leading up to the event, the Cosplay New Zealand Facebook group was on fire. Photos of people making last minute adjustments to cosplays, and some people just starting. Questions abounded, and advice was there seconds later. I loved sitting on the sidelines (so to speak) and offering encouragement and support. Every other comment was, "I can't wait to meet you"!

I woke up quite early (6:30? 7:00? Early for me, anyway) and laid everything out. I was ready to go out in public as Korra! I wasn't nervous though. All I've heard from the cosplay community are the positive messages from the Facebook group, so I put everything on and left the house like I was going to a friend's brunch party.

I only hit traffic once I got to the main road heading to the showgrounds. I was feeling a tiny bit self concious at this point - Korra's distinctive hair ornaments were waving in the breeze from my open window. I started seeing cosplayers though - droves of them, walking along the street. My spirits rose, and I waved out the window as Korra with Sunglasses.

Walking through the gates, all I could see were cosplayers. My jaw was dragging on the ground as I slowly made my way to the main entrance. I didn't know how to handle so much amazing in one place.

For some reason, for the past few Armageddons, this feeling had been lost. Something was different this time, but I don't think it was just the fact that I was dressed up. Maybe seeing all the other cosplayers, and noticing all the hard work they all put in to their outfits, maybe this is the sense of awe I could practically taste.

I started off by wandering around the jam-packed halls. Every now and then I caught a passing "Korra!", "That's Avatar Korra!", or sometimes "Katara!". Very soon I realised it would be impractical to walk through such a crowded area (there were over 120,000 attendees on Saturday) so I retreated to the foyer. I then ran into an old high school friend who won Dunedin's Best in Show - Courtney of Kayoss Cosplay. She was there with a Jinx with an amazing Fishbones prop, and a Demon Six tails from Naruto. I merged with the group and we became a very strange mash-up. From there we could barely walk a few feet without being asked for photos!

Saturday ended with a fantastic Avatar group and a hilarious cosplay parade. Ty Lee (Elishia) welcomed me with open arms (quite literally) and I was officially inducted into the world of cosplay.

Photo credit: Mustafa Qureshi

I was so completely exhausted that I slumped into bed at 8pm that day. Meanwhile, Courty Kayoss stayed awake until the wee hours of the morning sewing a huge sheep that doubled as a bag and finishing off her Astrid cosplay (How to Train Your Dragon II).

Somehow struggling to get out of bed at 7:30, I ran through the motions of becoming Korra. This time I didn't forget my armband. Did I mention that?

We got an excellent photo at the Hobbiton set. The rest of the photos I took were so lacking compared to the casual snapshot from the attendee of the stall.

There were no big events on Sunday apart from the great cosplay panels, but I caught the end of the League of Legends cosplay competition completely by accident. These guys were simply amazing, and the crowd loved them too. That would be a small teaser of the full competition I was attending the next day.

Monday was competition day, and by this point I was actually getting nervous. Seeing the calibre of the other cosplays was completely blowing me away - but I stuck to my guns and attended the call time regardless.

Our 11:30 slot contained an Ursula, Gamora, Stargate Serpent Guard, and a few other awesome cosplayers. Everyone was so supportive - by the end of the judging session, my nerves were completely gone. How could you be scared when you're performing in front of people who are rooting for you?

We had time to kill before the public display of the competitors on stage, so Six Tails, Jinx, and a Bucky Barnes we roped in slowly made our way to the V 360 photo set. It took us about 15 minutes there and 10 back, even though it was about 20 metres away. So many photos, so many wonderful people.

After the group competition shot, all 39 contestants/groups made their gradual way to the main stage, where we got to watch the SFX competition (which Courtney was competing in).

Since it's still the day of the competition, I haven't found any photos of the display yet. I'm happy to say Korra was a resounding success with the crowd, but not so for the competition as a whole. I'm so very proud of the contestants who won prizes, however. The Gamora from my call slot won a technical award with her very first go at making armour, and a Link who had a real Ocarina (and played it, too), busted out a hilarious skit, even though it was her first competition. She won the novice skit prize, as well.

Courtney once again was involved (she's a busy girl), as she had won Best in Show Dunedin with her Eowyn in armour cosplay (which was stunning!). Katniss took the Trans-Tasman cup with a mind-blowing performance and a dress that revealed another dress underneath. We tried to find Courtney after the show, but doubtless she was helping her SFX model out of the amazing makeup work she did.

And then it was over.

Reluctant to leave each other, Jinx (Georga), Six Tails (Courtney, not Kayoss) all said our "farewell"s and "well done"s and "congratulations", and went our separate ways, knowing that next year will be even better, and we'll all level up our cosplays for a mind-blowing convention.

---

• Cosplay New Zealand
• Kayoss Cosplay
• Developing Cosplay

Korra Cosplay - complete!

The last piece of Korra's outfit was completed today - the armband.

Originally I was going to represent it as a tattoo, but the latest season of Korra shows her bare arm - so it is definitely not a tattoo!

I decided to make it out of craft foam I had lying around. The colours were close enough.

Triangles cut out of the foam

All superglued together

Painted spots on

Heat formed

Crappy closure thing. :\

Close scrutiny will betray the shoddy workmanship, but from a distance it looks kinda badass.

I am so excited to run around Armageddon Expo in this thing. I might even enter the competition, because why not?

---

View the first post in this series where I begin my cosplay journey by making pants!

Korra Cosplay - New wristbands and hair thingies

One of the most distinctive features of Korra's look are her hair ornament thingies. That's the technical term, by the way.

I found this tutorial on YouTube on a way to make Korra's hair pieces, and made mine based on that.

I managed to find the big straws for the front pieces, but couldn't find the cup for the main piece so I cut the bottom out of a plastic shot cup instead.

I didn't have any fabric glue, but PVA and superglue seemed to do the trick. I used white cord around the top and base to finish them off.

From the same video mentioned above, the technique for putting the things in is invaluable. You twist your hair and stuff as much as you can get away with into the tubes, then untwist your hair. Magically, the pieces stay in!

I found that the top one was a bit floppy, so I'll find a way to attach it using bobby pins so it doesn't fall out.

*serious face*

My hair is probably a bit too long and not layered enough to be exactly like Korra's but it gets the point across.

Initially I had made Korra's wristbands as bracers which looked pretty cool, but I couldn't lace them up by myself. I decided to remake them just out of fabric to save me time. They would be a little more accurate to the design that way.

I used some leftover white cotton/lycra that I used for the trim on the top, plus some of the blue fabric that currently lines the leather wrap.

I couldn't be bothered finishing the seams. I think that will come back to haunt me. Also, I only managed to sew one of the white bands on inside-out.

The result is pretty awesome actually. They are pretty tight, so I don't think they'll fall down.

I tried everything on again. I didn't know this was the most fun part of cosplay, but it is. By the way, this costume is comfy enough to lounge around in.

So what's next?

• Remove the awkward tacking from the shirt
• Fix the bit of the leather wrap I totally broke
• Possibly make some more accessible pockets
• Use velcro and/or snaps to keep the apron below the belt
• Make a stencil for the upper arm tattoo (I'll use body/face paint)

I'm dangerously close to finishing this with about a month left till the actual con. I think I'm doing it wrong.

---

Next post: Korra cosplay, complete!

Korra Cosplay - Boots

I still can't figure out which part of this costume has been the most daunting. Korra's top was a challenge in terms of drafting and construction, and the fur wrap was difficult as it used many new materials and tricky parts. The boots brought another challenge, as they had to stand up to a full three days of walking around the convention floor.

Trying to find a perfect match for the boots was a little out of the question. Most brown slipper-type boots with sheepskin inside would cost upwards of $50.

I had a look around for alternatives and discovered you could actually make a fabric cover for an existing pair of boots. I read through Sarcasm-Hime's bootcovers tutorial which was intended for stretch fabric, but would suffice for the application I was thinking of.

First step was to cut out all the pieces.

I had a vague idea of how it was going to be constructed.

Yes, that's corduroy. There was a sale on, $6/m, don't judge.

Looking good so far! The cover for the boot shaft was a little too tight around the top - I should have given it a lot more ease.

Next up was more sheepskin work.

After assembling the cuff, it was onto some very nerve-wracking gluing. The edge of the boot slip by the sole needed to be notched all around so it would fold under, then glued with contact glue (it took so long to get it all off my fingers).

The cuff was glued on as well, from the inside and the outside.

I gave that glue a workout after it had dried. The boots are a little small for me in that the ankle is quite tight, so it takes a lot of tugging to pull them on. I'm pretty confident the glue will hold. :)

I'm so glad I used sheepskin for the leather wrap instead of fur - it gives a better sense of cohesion this way.

I'm very close to finishing. I'm going to remake the bracers (so I can put them on by myself) and make the hair ornaments, then work on the finer details and adjustments.

---

Next post: Korra's hair ornaments and new wristbands

Korra Cosplay - Fur wrap

Making the fur wrap for Korra's costume introduced me to working with leather, sheepskin, and best of all, ADOS super glue.

I'm still trying to figure out exactly what the fur wrap is for. A convenient sitting place? To keep your bum warm? Your guess is as good as mine.

Probably just to match her boots

I started by buying a leather scrap from a fabric store. I would have used synthetic, but it seems to create a bit of shine when a camera is using flash. I also wanted a more natural, water-tribish look.

I was also going to use a fur trim, but when considering what to use for the white trim on the boots, I decided on sheepskin (shearling).

The trick would be finding some - you'd think in a country where sheep outnumber the population seven to one, it would be easy. Not so! It took me a good long while browsing through thrift shops, TradeMe and souvenir stores to find a reasonably priced sheepskin rug.

Next, I needed to wash it. It smelled of old people and must. About five rinses in warm water did it. The rainy and cold weather didn't really help with drying, but it got there after about three days.

In the meantime, I began work on the leather. Since it was my first time working with leather, I was pretty nervous! Once it's cut, it's cut, and I only had enough to cut out one skirt.

I started by marking out where to cut on the wrong (right) side, then used a ruler and a rotary cutter to cut everything out.

Since the sheepskin, leather, and layers inside would make it quite heavy, I designed the skirt to have a belt hidden inside to hold it up. I would then cover it with the blue fabric belt to be more accurate to the original design.

This was probably the most enjoyable part of the process - making a belt fastening! I started by cutting a strip, then removing a slot where the buckle would go.

After I had it folded over, a mushed a belt loop in there along with a generous amount of ADOS glue. Dive weights to the rescue again!

To reinforce the glue, I pierced two holes and crushed a rivet into each. Solid!

I also cut and sewed a lining from some blue fabric, and made some pockets for holding phone, keys, and cash.

Now onto the sheepskin! I used the rotary cutter to score the leather from the back, then ripped the pieces out. This preserved the natural edges of the wool instead of cutting hard lines into it.

 More glue was used to attach the trim to the leather.

Here it is all bonded together.

Ever paranoid about it falling apart, I cut some more leather strips and glued them onto the join between the sheepskin and the leather.

The final piece of the puzzle - two fabric belt covers for the leather fastener. The wider parts are tubes that will encase the belt.

I used the last of the leather scraps to join the lining. By this point I had run out of glue, but I'm pretty confident this isn't going to fall apart any time soon.

Here you can see the leather belt peeking out of the fabric enclosure.

And the final result.

I really love how it turned out. The dark blue apron underneath sneaks out the top, so I'll need to figure out something to keep it in line.

I'm also not a fan of the bracers any more. I think I'll just make some fabric ones - then I won't require assistance every time I need to put them on!

The end is sight, though. The boots I'm wearing in the photo above need to be covered in the right fabric, I need to make the hair ornaments, and I need to sort out her armband/tattoo thing. But after that...it might be the end.

---

Next post: Korra's boots