Showing posts with label sewing. Show all posts
Showing posts with label sewing. Show all posts

3 Mar 2015

Cosplay Shenanigans: Me Tarzan, You Petticoat

My weekly post has degraded into a fortnightly one, but I have an excuse - I climbed Mt Taranaki this weekend!


Not exactly cosplay related, but it was cool! It also meant I had no time on the weekend to work on Jane!

I have got a bit of progress to show, however. I found this wonderful tutorial on how to make a Victorian petticoat. Thankfully mine didn't have to be floor length. I dug out a couple of metres of white cotton that I don't remember buying, let alone what I bought it for. Now it's going to become a petticoat!


After cutting all the pieces out, I started assembling the frills. Messed up a bit by not making them long enough. I made them twice as long as the across-back measurement, not twice as long as the actual back piece. Whoops! I reduced my four frills to three, and split one between two of the others to make it longer.


With my overlocker working really well right now, I joined the trim to all the frills, and assembled the front and side panels.


Each frill was then gathered and sewn down onto the back panel.


I decided to use elastic to gather the back, because I'm lazy and it means it will fit over my head.


Then the side panels were sewn to the back, catching the frills along the way.


And here's the result when worn over the bustle. So poofy! Now I need to trim the bottom, attach the lace, then start ripping it all up!

19 Feb 2015

Simplicity 9891: The Elven Dress

What would you do if you won a pass to Hobbiton? Sew an Elven dress to wear, of course! No...?




Two weeks before Hobbiton, I picked out a pattern - Simplicity 9891. I liked the collar on View C, but didn't like the bell sleeves. I decided I would combine it with View A, and have the chiffon sleeves.


That weekend I made a toile, minus the sleeves. I was really happy with the size, not so happy with the bust, however I didn't have time to adjust it. I finished the toile sometime in the evening on Friday, then went fabric shopping on Sunday (one week before Hobbiton!). Saturday was a beach day!

While I was initially going to find a nice, elfish silver for the main fabric, I stumbled across something I couldn't resist.


A printed cotton from Japan, with metallic ink that caught the light. It was just sooooo pretty! Also, on sale! How could I say no? I also bought some light blue polyester chiffon, and a thick fabric (cannot remember the type for the life of me) for the collar and yoke. I also bought some hefty fusible interfacing.

Time to start sewing the real thing! One problem - our small dining table wasn't long enough to cut the full length panels. I had to do some awkward fabric shifting while I was pinning everything. Cutting the fabric is probably my least favourite part. I just want to start sewing it already!




The eternal dilemma - what is the laziest way I can finish these seams? I decided against sewing everything together with the overlocker, and instead finished the seams on all seven panels before assembling them with the sewing machine. This meant I could press the seams open, which gives the seams a crisper look on the outside. It also reduced the bulk at intersections with the yoke.

Sewing the yoke was fun, but the fabric I got frayed every which way. Why didn't I finish those seams with the overlocker? I have no idea why not. I just didn't, and that was stupid. Also, after sewing it all together, I realised the interfacing was way too stiff. It made the collar stick up all awesome, but the front of the yoke didn't sit flat.

On Sunday evening I had the main bodice all together, minus the hem and the hook and eye closure at the neck.


Monday meant back to work, so I only had the evenings and Saturday to finish the dress. Somehow I only got around to sewing two nights that week. I stayed up way too late one night cutting the sleeves out. I also managed to smash a jar I was using as a paperweight onto the ground at midnight. I assembled the sleeves on another night, and left everything else for Saturday.

As I started sewing the set-in sleeves, I realised that this dress has no armhole facing. I could have made some if I realised sooner. Now I had these notched, ratty seams that you could see from the outside. Argh! After some intense pressing, and some stitching to keep it all in place, the result was acceptable. Fortunately the sleeves set in really nicely. Probably thanks to the slightly stretchy polyester.

Next up, I got to test out the hemming assist contraption on my dress form. It was pretty quick to use, although a neater result would have come from hand sewing with a catchstitch or slipstitch. This just produces a running stitch with a controlled stitch length.



At this point it was only the afternoon on Saturday, so I decided to make some pockets to keep all my elvish goodies, and finally got around to fixing up the $2 shop ears I bought. Some lipstick applied with a brush made a huge difference. I sprayed them with a fixative (meant for pencil drawings but whatever), and they looked infinitely better. Not quite the quality of the silicone ears that Courty made, but from a distance, they'd do.


And here's the final result.


Close up of the collar and yoke
Zipper - my dress form's neck is a bit bigger than mine

See what we got up to as Elves in Hobbiton!

9 Feb 2015

Cosplay Shenanigans: The one week Elven dress

Did I mention I'm going to Hobbiton? Because I am. With Courty of Kayoss Cosplay.

Hobbiton held a competition at Auckland Armageddon Expo where the best photo of you in front of the Hobbiton door won you a double pass to visit, and we won! Courty posted the entry though, so she gets extra credit.

Naturally we had to make a costume - this time, Elven garb. I don't think I've sewn a full-length gown before, but no time like the present!

Only problem is that I only have a week to make it. Eep! The three day weekend lent a lot of time to sew, and I got way more done than I thought. I finished the toile on Friday, had Saturday off to go to the beach, then made the majority of the final garment on Sunday.

I also found the most amazing printed cotton to use. Not very elvish in composition, but it was on sale!


There's a pattern sewn in to the weave or part of the print that has a metallic sheen, so the sunlight dances off it when you get the right angle. Siiiiigh! Once again, Smart Dress Fabrics wins the prize for the most well-rounded and fairly priced collection.


Here's the dress as it stands today. This is also my craft supply corner. I think I need a second room.

Unfortunately I haven't been able to work on Jane at all! There's still a fair amount of time, but I've got a lot of leather work to do. No pressure, ha, ha...

24 Jan 2015

Korra Book 4 Cosplay write-up

The January Auckland Cosplay Picnic gave a good incentive to finish my second cosplay - once again, Korra. But this time from Book 4, in her Earth Kingdom garb. Turned out to be perfect for a picnic!



I started with the pants, as they were very similar to her season 1 outfit.



The cuffs were cut and sewn separately, then sewn into the pants. I put elastic in them it keep them taut. The ties were made much later.

Next up, the backpack! This was a pretty fun part. I learned how to make (and sew) piping, and used sew-in interfacing for the first time. I prefer iron on, though.

The tutorial I used was this one, minus a few bits and pieces.

Sewing the interfacing in

Sewing the piping! This fabric is from the dress I'm using for Post Apocalyptic Jane

Sewing it together

The outside complete

Added some lining from some fat quarters I had lying around

Strap sewn in, flap sewn on, and an elastic closure added

I then started work on the top. This time I used what I learned from a draping panel at Armageddon, and it came out pretty well!


The darker green was very hard to find. I wanted to use a natural fibre, but there was only polyester!

The detailing is sewn together

And the complete tunic

At this point I think the picnic was only a week away, and I started panicking a wee bit. My wig hadn't arrived, and I didn't want to cut my hair. I had kind of started the shoes, but still had a number of small things to finish off. I dug my heels in and got back to work!

I pulled apart these old, worn shoes to make the template



The outers are done!

As well as the insole - cardboard with craft foam, then fabric sewn onto it

After a lot of hot glue, the end result

My wig arrived with plenty of time to spare - I'm very pleased with the quality! It needs a bit of styling, but would do for the picnic.

The night before the picnic, I made the belt and attached the button to the backpack. Oh wait, what button? I don't have a big yellow button!

3D printer to the rescue! In half an hour, I had a perfect yellow button, which I attached with leftover piping I turned through.



And here's the end result!


Photo by Pixiscene Cosmedia

24 Aug 2014

Korra Cosplay: Shirt, part 1

Sewing Korra's shirt is becoming quite the saga.

I knew this would be the most difficult part from the beginning, due to the design of the collar.


The big problem here is that it looks impossible to pull over her head. While making the muslins for this, I discovered that there was no way to get a nice knit fabric over my head while still having it sit tightly against my neck. Using spandex would almost solve the problem, but then you'd need to make sure the collar keeps its shape. That sort of construction is beyond my ability right now. Also, spandex is usually shiny, so would make Korra look like a superhero.

I compromised by cutting a slit into the back of the collar, which will fasten closed with a loop and button. It's not accurate to the design, but come on!

I didn't have much trouble drafting up the pattern for the main part of the top, but the collar boggled me.


Despite the inside-out seams around the armholes, the second muslin I made fit pretty well (except for the collar).

In the end, I decided I would add in a front facing with interfacing to keep the front of the collar rigid. I was over the delusion that I could have it sitting tight against my neck, but as long as it kept the sharp corners I'd be happy.

The back piece cut out


A couple of tests for the collar. I later discarded the back facing - it simply wouldn't stretch over my head

Attaching the facing to the collar

Planning out the bias binding
Finishing the collar with bias binding will also give it some rigidity. The hardest part were the inverted 'V' shapes. This tutorial helped a whole lot - I just had to make sure to space them out right (a ruler helps).

I then used a tailor's ham to steam the collar into submission.

The results thus far:


The cut-out is bigger than I would like, but this shirt sucks my soul away every time I work on it, so I'm not too fussed.

I need to pick up some white knit fabric in a similar colour to the binding (it's slightly off-white), then attach the white trim to the armholes. Then the top is done!

I'm hoping to finish the shirt before the week is out. The next item is her leather wrap. Yikes! Real leather!


Next post: Korra's shirt, part two

21 Aug 2014

Korra Cosplay: Armbands/Bracers

Believe it or not, progress has been made on my Korra cosplay.

In my last post I made Korra's pants; shortly after that I made the apron thing (haven't uploaded photos yet). At the moment it ties up at the back. I will probably put some snaps or belt carriers on the pants to hold it together.

One of my kind friends gave me some boots that are pretty much perfect. The material on the outside is plain fabric, so it will be easy to sew into. They also slouch down a bit, so I can put some suede of the right colour on it and it should have the baggy feel of Korra's boots.

I've also made a dozen or so muslins for Korra's top - I'll dedicate a whole post to that soon.

In the meantime I distracted myself by making Korra's armbands.

I didn't feel confident that I could sew some armbands that would stay up, so I opted to make something a little more solid - some fabric bracers.


I grabbed some black craft foam (you can pick this up from any craft store - I got mine from Spotlight) and some material the same colour as her apron. This fabric is made of stretchier stuff than the apron is, so it should be able to conform to the rounded arm shape.

I used Ados glue to bind the fabric to the foam - the stuff would seep through, so I only glued on the underside of the bracer.


Now I have a bunch of these things, called grommets or eyelets or what have you. I'm pretty sure that I only have the one half of the little things. As you can see in this tutorial the grommet consists of two parts - the grommet and the washer. I was missing the washers.

So I did the unthinkable and smooshed the grommets together. You can't really tell that I did this because the eyelets will be located under the bracer and you won't be able to see the extra metal inside of them.


Here's my test piece. The Ados bonded really well - I'm glad I didn't have to run out and grab any fabric glue.


Here's the final pieces with the fabric glued on. Making the pattern is pretty straightforward. Measure around your wrist and around your arm where the bracer will come up to. Then measure the length. Remove a centimetre from the horizontal measurements so you leave a gap for the ties.


After inserting the grommets. The fabric is a little wrinkly, but remember this will be stretched around my wrist so the fabric will even out.


After adding some string and tying it on. I think I need to lace it another way - the wrist and the other end should be pulling horizontally, not downwards.

The one part that is missing is the white trim. Since I opted to make bracers, I couldn't just attach some bias binding or white ribbing to the outside.

Since the string is kind of scratchy, so I thought I might make a couple of tight fabric wristbands and put them on underneath the bracers.


Pretty happy with the effect here. I'm wearing them around to make sure the trim doesn't slip below the bracer. To fix this I would add snaps or some velcro to secure it in place.


Rarr! I feel strong!



Next post: Korra's shirt, part one