Showing posts with label props. Show all posts
Showing posts with label props. Show all posts

9 Mar 2015

Post Apocalyptic Jane nears completion!

Hamilton Armageddon is less than a week away now (*internal screaming*) but I'm progressing pretty quickly.

I'm nearly finished making my first (ish) prop! The spearhead from one of the earlier scenes, when Tarzan is fighting the leopard.


Camping mats! They are very squishy and difficult to rough-handle.

After attacking it with a dremel

First pieces of Worbla - so nervous!

Post worbla! It's hard!

Several coats of gesso sanded down, then three coats of a PVA/water mix

I just realised I did so much last week. I finished the petticoat, the leather poncho, the armband, and I did a lot of weathering.

A pair of gloves I picked up from First Scene's garage sale

Cutting holes and roughing them up with sandpaper

Using dark foundation and soft artist's pastel chalk to apply dirt and blood stains
While working on leather belts and closures, I had the awful realisation I've done all of the buckles wrong. Ugh!

I also stumbled across a Gaelic fair while out with Louella - the re-enactment actors let us wear their helmets!

Rarr!

2 Feb 2015

Cosplay Shenanigans: The great expanding foam failure of 2015

I was pretty stoked on Thursday when I finished a few evenings' worth of work making the bustle in one day. My productive streak ended there, though; I forgot I had a dinner on Friday night, so that was written off. Then on Saturday we had a hike on Mt Rangitoto which wrote that day off as well.

So that left Sunday, a whole day!

Only I don't think I started work on anything until about 3pm...

I started on the spear for Jane - it's the tip of Tarzan's spear from when he was fighting the leopard.

I started by cutting the template from card


Then placing a wooden pole into the gap

Then hot glued it all together.

At this point I was getting excited - I could finally use the expanding foam I bought a while ago!

I brushed up on the technique by watching Kamui's video tutorial.

However, while my boyfriend and I were spraying one side, we could feel the nozzle beginning to block up, and realised we only had one shot at this.

The only problem was that the foam wasn't sticking to the cardboard in its non-expanded state - it was too slippery on the wax cardboard. So when we held the prop vertically to get the other side, it all started plopping off onto the tray we had out.

And then the can ran out.


My advice for next time? If you have to use expanding foam, buy two small cans, and be sure to do one side at a time like the tutorial says.

Next time, I'm going to try and find the foam that you mix two parts together to activate - that way you don't have to worry about the nozzle blocking up while you wait for one side of the thing to set.

On a better note, I bought a little fibreglass starter kit! I'm going to hopefully use this with my Witch King helm, which I'll start after Hamilton Armageddon.